Difference between revisions of "Projector"

Revision as of 19:33, 19 October 2017

Large Ship / Station

Projector

 

Components

Required

 

 

Steel Plate

10

 

 

Computer

2

 

Motor

1

 

Large Steel Tube

2

 

Construction Component

4

 

Steel Plate

11

 

 

Mass (kg):

0

 

Integrity:

0

 

Build time (seconds):

20

 

Active power consumption (MW):

0.0002

 

Airtight:

No

 

Power Consumer Group:

Utility

 

Dimensions (W x H x D):

1 x 1 x 1

Small Ship

Projector

 

Components

Required

 

 

Steel Plate

1

 

 

Computer

2

 

Motor

1

 

Large Steel Tube

2

 

Construction Component

2

 

Steel Plate

1

 

 

Mass (kg):

0

 

Integrity:

0

 

Build time (seconds):

10

 

Active power consumption (MW):

0.0001

 

Airtight:

Yes - all orientations

 

Power Consumer Group:

Utility

 

Dimensions (W x H x D):

1 x 1 x 1

Overview

The Projector is a block capable of displaying full sized Blueprints in a projected image around it. It is available for both large ships, stations, and small ships. The projection can either be instantly spawned in a Scenario gamemode, or welded together in survival.

Usage

Before it can be used the Projector must first be powered, and also the player needs a Blueprint they can use in order for the block to project it and unlock additional options. Once a blueprint has been selected, the required components will be displayed in the Terminal that are needed to complete it. The model will appear near the block.

In survival, the player must adjust the position of it so at least one block of the projection is touching the Projector block. The block touching the Projector is the first starting block. When welding, that block will be welded first, then others adjacent to it. The same principle applies to the blocks after that until the model is completely built. This method can also be used to repair an already built ship. Simply Blueprint the ship (before it was damaged), then use the projector and line it up with your ship so it overlaps. If there are any damaged, or missing blocks, the projector will display it and allow you to weld that area.

In Scenarios gamemode the <insert block instant option here> allows the projector (when triggered) to instantly spawn the blueprint instead of it being constructed piece by piece.

• For more information on how to use the projector block, see the Projector Guide

Limitations

The projector can only display a blueprint appropriate to the grid it is on. In other words, if your projector is built on a large ship/station grid, you can only display/construct blueprints that are also either made of large ship/station blocks. The same rule applies to a small ship projector as it cannot display ships made from large ship blocks.

To build a small-grid blueprint while working from a large grid, or vice versa, Landing Gear blocks make a good workaround. Build a Landing Gear of the same size as the blueprint, oriented so that it is in range to latch to a handy surface of the existing grid. Then add to it a power source and the Projector. You may also need to add a Control Panel or an Antenna, since Landing Gear and Projectors do not provide terminal access by themselves. Now the Landing Gear can be commanded to lock onto the old grid so that the grid under construction can remain attached to it without needing to be part of it.

Terminal

<will fill in>

Media

Tips

Known Issues

• As mentioned, the projector is incapable of building small-ships on large grids, and vise versa.

Update History