Productivity Upgrade Module
From Space Engineers Wiki
Revision as of 02:26, 20 March 2016 by Westeastnorth (talk | contribs) (+added new field - airtightness)
Large Ship / Station
Productivity Upgrade ModuleComponents
Required
Mass (kg):
0
Integrity:
0
Build time (seconds):
8
Disassemble Ratio:
2.5
Airtight:
No
Dimensions (W x H x D):
1 x 2 x 1
Contents
Overview
The Productivity Upgrade Module is a 2x1x1 block that can be placed on an Assembler or a Refinery to make its Assembling/Refining speed increase. Each module in addition to increasing the speed it processes ores or produces components, increases it's power consumption to a maximum 2.8 MW.
Usage
The Productivity Upgrade Module can only function if placed on a Refinery's or Assembler's attachment point, which increases the speed of Assembling/Refining. When a Productivity module is placed on every possible attachment point it increases the productivity (which is the speed of Refining/Assembling) by 400%, which is a total of 500%. The Productivity module must be fully placed onto an Assembler/Refinery for it to function correctly.
Formula:
Total Productivity = 100% + 50% x Attachment points connected to upgrade module, each module provides 2.
(100% + 50% * ProductivityAttachments)
Power Consumption = ---------------------------------------
(1.2228445^PowerEfficiencyAttachments)
| No. of Modules | Total Productivity | Max Power Consumption [kW] |
|---|---|---|
| 0 | 100% | 560.00 |
| 1 | 200% | 1120.00 |
| 2 | 300% | 1680.00 |
| 3 | 400% | 2240.00 |
| 4 | 500% | 2800.00 |
Media
Tips
- To maximize Productivity is would take 8 motors, 40 Large Steel Tubes, 80 Small Steel Tubes, 160 Construction Components, and 400 Steel Plates in order get 300% Productivity.
