Difference between revisions of "Conveyor Sorter"
From Space Engineers Wiki
m (added into category) |
m (+added new field - airtightness) |
||
| Line 10: | Line 10: | ||
| scomponentstructure = 3 | | scomponentstructure = 3 | ||
| + | | sairtightness = yes | ||
| scomponent1 = Interior Plate | | scomponent1 = Interior Plate | ||
| scomponent1amt = 1 | | scomponent1amt = 1 | ||
| Line 35: | Line 36: | ||
| lcomponentstructure = 3 | | lcomponentstructure = 3 | ||
| + | | lairtightness = no | ||
| lcomponent1 = Interior Plate | | lcomponent1 = Interior Plate | ||
| lcomponent1amt = 10 | | lcomponent1amt = 10 | ||
Revision as of 14:16, 21 March 2016
Large Ship / Station
Conveyor SorterComponents
Required
20
Mass (kg):
0
Integrity:
0
Build time (seconds):
24
Active power consumption (MW):
0.00025
Airtight:
No
Dimensions (W x H x D):
1 x 1 x 1
Small Ship
Conveyor SorterComponents
Required
Mass (kg):
0
Integrity:
0
Build time (seconds):
24
Active power consumption (MW):
0.0001
Airtight:
Yes - all orientations
Dimensions (W x H x D):
1 x 1 x 1
Contents
Overview
The conveyor sorter is a one way block that is capable of separating incoming items from either Cargo Containers or other Conveyor blocks. It can either allow specific items, or blacklist them and allow the rest through.
Usage
The sorter is a one way Conveyor. The arrows indicate the direction the items will be passing through. Items cannot travel both ways through the sorting conveyor. The player can either choose to blacklist a few items, or white-list a few and block the rest. This block can be useful for allowing only specific items such as Ores and Components to be stored into a Cargo Container.
Settings
- Drain All - Automatically pulls items through it from connected inventories. If filters are set, only selected items will be pulled through.
- Filter Mode - Adjusts between Blacklist (items in list will not pass through), and Whitelist (items in list are the only ones allowed to pass through).
- Active Filters - Any items in this list will either be allowed through, or denied depending on which filter mode is selected.
- Add new filter - All items that can be filtered will be listed here and can be added into the active filter. Items with special characters represent cateogires. All items under that category will either be allowed or denied. (example: *ore* represents all Ores)
Media
Tips
- If you're creating a container for ores only, it's easier to add *ores* for example to the active filters list, rather than selecting each individual ore. The only exception is if you want only specific ores inside.
- None of their sides are airtight.
Known Issues
Related Items
Programming
Update History
| N/A |
|
