Difference between revisions of "Productivity Upgrade Module"
Jagodragon (talk | contribs) (→Tips) |
Jagodragon (talk | contribs) (→Tips) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 54: | Line 54: | ||
*To maximize Productivity is would take 16 [[motor]]s, 240 [[Computer]]s, 80 [[Small Steel Tube]]s, 160 [[Construction Component]]s, and 400 [[Steel Plate]]s in order get 300% Productivity. | *To maximize Productivity is would take 16 [[motor]]s, 240 [[Computer]]s, 80 [[Small Steel Tube]]s, 160 [[Construction Component]]s, and 400 [[Steel Plate]]s in order get 300% Productivity. | ||
| − | *The fact that each | + | *The fact that each attachment point is calculated separately means that you can span these across two machines or share them with a [[Refinery]] and an [[Assembler]]. |
== Known Issues == | == Known Issues == | ||
Latest revision as of 00:39, 9 June 2023
Speed Module
2,508,000,000 mg
2.508 t
Contents
Overview
The Speed Module (previously know as the Productivity Upgrade Module) is a 2x1x1 block that can be placed on an Assembler or a Refinery to make its Assembling/Refining speed increase. Each module will increase the speed of ore/component production, and will also increase power consumption up to a maximum of 2.8 MW.
Usage
The Speed Module can only function if placed on a Refinery's or Assembler's attachment point, which increases the speed of Assembling/Refining. When a Speed module is placed on every possible attachment point it increases the productivity (which is the speed of Refining/Assembling) by 400%, which is a total of 500%. The Speed module must be fully placed onto an Assembler/Refinery for it to function properly, as a single upgrade module may be placed on only one upgrade port, this does halve the efficacy of the modules, so instead of a 100% bonus to productivity, you receive only a 50% bonus.
Formula:
Total Productivity = 100% + 50% x Attachment points connected to upgrade module, each module provides 2.
(100% + 50% * SpeedAttachments)
Power Consumption = ---------------------------------------
(1.2228445^PowerEfficiencyAttachments)
| No. of Modules | No. of Active Attachment Points | Total Productivity | Max Power Consumption [kW] |
|---|---|---|---|
| 0 | 0 | 100% | 560.00 |
| 1 | 1 | 150% | 840.00 |
| 1 | 2 | 200% | 1120.00 |
| 2 | 3 | 250% | 1400.00 |
| 2 | 4 | 300% | 1680.00 |
| 3 | 5 | 350% | 1960.00 |
| 3 | 6 | 400% | 2240.00 |
| 4 | 7 | 450% | 2520.00 |
| 4 | 8 | 500% | 2800.00 |
Media
Tips
- To maximize Productivity is would take 16 motors, 240 Computers, 80 Small Steel Tubes, 160 Construction Components, and 400 Steel Plates in order get 300% Productivity.
- The fact that each attachment point is calculated separately means that you can span these across two machines or share them with a Refinery and an Assembler.
