Difference between revisions of "Power Efficiency Upgrade Module"
Vox Serico (talk | contribs) m (category) |
SimpleGopnik (talk | contribs) (updated resource cost in the tips section.) |
||
Line 38: | Line 38: | ||
== Tips == | == Tips == | ||
− | *To maximize power efficiency it would take | + | *To maximize power efficiency it would take 16 [[Motor]]s, 80 [[Power Cell]]s, 80 [[Small Steel Tube]]s, 160 [[Construction Component]]s, and 400 [[Steel Plate]]s just to get that extra 500% power efficiency. |
== Related Items == | == Related Items == |
Revision as of 19:24, 16 July 2020
2,996,000,000 mg
2.996 t
Contents
Overview
The Power Efficiency Module is a 2×1×1 block that can be placed on an Assembler or a Refinery to decrease power consumption.
Usage
This module, just like the Yield Module and the Speed Module, has 2 attachment points that look like small squares on the flat side of the block. These attachment points can be placed against the attachment points found on the backs of refineries or all sides of assemblers to increase the Power Efficiency of the refinery or assembler by +50% per attachment point. As both kinds of production blocks have 8 total attachment points, the maximum Power Efficiency for those blocks is 500% (100% for a refinery or assembler without any modules), which brings down power consumption to only 20% its original value.
These modules only affect the active power consumption (while the production block is working); it does not affect the minimum power consumption of the machine when idle.
Formula:
Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
No. of Modules | Total Power Efficiency | Max Power Consumption [kW] |
---|---|---|
0 | 100% | 560.00 |
1 | 150% | 374.49 |
2 | 224% | 250.44 |
3 | 334% | 167.48 |
4 | 500% | 112.00 |
Media
Tips
- To maximize power efficiency it would take 16 Motors, 80 Power Cells, 80 Small Steel Tubes, 160 Construction Components, and 400 Steel Plates just to get that extra 500% power efficiency.