Difference between revisions of "Power Efficiency Upgrade Module"
(Rewrote the Usage section to more clearly state how the attachment points work. Removed empty sections.) |
Vox Serico (talk | contribs) |
||
| Line 72: | Line 72: | ||
*[[Effectiveness Upgrade Module|Yield Module]] | *[[Effectiveness Upgrade Module|Yield Module]] | ||
*[[Productivity Upgrade Module|Speed Module]] | *[[Productivity Upgrade Module|Speed Module]] | ||
| + | [[Category:Functional Blocks]] | ||
Revision as of 01:42, 16 March 2020
Contents
Overview
The Power Efficiency Module is a 2×1×1 block that can be placed on an Assembler or a Refinery to decrease power consumption.
Usage
This module, just like the Yield Module and the Speed Module, has 2 attachment points that look like small squares on the flat side of the block. These attachment points can be placed against the attachment points found on the backs of refineries or all sides of assemblers to increase the Power Efficiency of the refinery or assembler by +50% per attachment point. As both kinds of production blocks have 8 total attachment points, the maximum Power Efficiency for those blocks is 500% (100% for a refinery or assembler without any modules), which brings down power consumption to only 20% its original value.
These modules only affect the active power consumption (while the production block is working); it does not affect the minimum power consumption of the machine when idle.
Formula:
Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
| No. of Modules | Total Power Efficiency | Max Power Consumption [kW] |
|---|---|---|
| 0 | 100% | 560.00 |
| 1 | 150% | 374.49 |
| 2 | 224% | 250.44 |
| 3 | 334% | 167.48 |
| 4 | 500% | 112.00 |
Media
Tips
- To maximize power efficiency it would take 8 Motors, 40 Large Steel Tubes, 80 Small Steel Tubes, 160 Construction Components, and 400 Steel Plates just to get that extra 500% power efficiency.
