Difference between revisions of "Power Efficiency Upgrade Module"
From Space Engineers Wiki
(+updated added table.) |
m |
||
| Line 42: | Line 42: | ||
{|class="wikitable" | {|class="wikitable" | ||
|- | |- | ||
| − | !No. of Modules !! Total | + | !No. of Modules !! Total Power Effeciency || Max Power Consumption [kW] |
|- | |- | ||
! 0 | ! 0 | ||
Revision as of 16:25, 14 November 2015
Large Ship / Station
Power Efficiency Upgrade ModuleComponents
Required
Mass (kg):
0
Integrity:
0
Build time (seconds):
8
Disassemble Ratio:
2.5
Dimensions (W x H x D):
1 x 2 x 1
Contents
Overview
The Power Efficiency Upgrade Module is a 2x1x1 block that can be placed on an Assembler or a Refinery to decrease the power consumption.
Usage
The Power Efficiency Upgrade Module decrease the amount of power used by the Refinery/Assembler a maximum of four can be placed on both the Refinery. While the Assembler can only fit 2 or 3 modules. Using the maximum amount of modules that a refinery could hold would cause the Refinery/Assembler to have 500% Power Efficiency - bring down its power consumption while running to only 20% it would have been. The Power Efficiency Upgrade Module must be fully put on a attachment point to function correctly. It does not affect its minimum or idle power requirement, only its maximum.
Formula:
Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
| No. of Modules | Total Power Effeciency | Max Power Consumption [kW] |
|---|---|---|
| 0 | 100% | 560.00 |
| 1 | 150% | 374.49 |
| 2 | 224% | 250.44 |
| 3 | 334% | 167.48 |
| 4 | 500% | 112.00 |
Media
Tips
- To maximize power efficiency it would take 8 Motors, 40 Large Steel Tubes, 80 Small Steel Tubes, 160 Construction Components, and 400 Steel Plates just to get that extra 500% power efficiency.
