Difference between revisions of "Air Vent"
From Space Engineers Wiki
m (→Media) |
(→Tips) |
||
| Line 67: | Line 67: | ||
== Tips == | == Tips == | ||
| + | *You can pressurize a room without it being connected to the conveyors to the oxygen generator. Simply connect a vent directly from the pressurized room to another vent in the non-pressurized one. Set the vent in the pressurized room to '''depressurize'''. The oxygen will be pulled from that room to the empty one. | ||
== Known Issues== | == Known Issues== | ||
Revision as of 19:10, 22 July 2015
Large Ship / Station
Air VentComponents
Required
Mass (kg):
0
Integrity:
0
Build time (seconds):
50
Active power consumption (MW):
0.33
Idle Power Consumption (MW):
0.001
Dimensions (W x H x D):
1 x 1 x 1
This article is a
Contents
Overview
This block was introduced in V1.074.
It's part of the games Oxygen system. An air vent must be connected to a source of oxygen in order to distribute breathable O2 to the room.
Valid sources are for example an Oxygen Generator or an Oxygen Tank.
Usage
The air vent has to be connected to those blocks either directly by it's conveyor port on the back, or by connecting it to an existing Conveyor Network where at least one oxygen source block is present. (see above)
Air vent state indicator
On the front of the air vent are 4 indicators that show the current status of the vent and also deliver some information about the room the vent is installed in.
Game version: 1.078.009
 |
Air vent is pressurizing the room. The number of indicators shows the current room pressure. 1: O2 level < 25%, 2: 25% <= O2 level < 50%, 3: 50% <= O2 level < 75%, 4: O2 level > 75% |
 |
Air vent set to "Depressurize". It draws O2 fromt he room until it's empty. The number of indicators shows the remaining room pressure. 4: O2 level > 75%, 3: 50% <= O2 level < 75%, 2: 25% <= O2 level < 50%, 1: O2 level < 25% |
 |
Room is not sealed against the open space. Air vent can't pressurize it. |
 |
Air vent deactivated |
Oxygen ventilation capacities
Game version: 1.078.009
| Input rate | 300 O2/s | Applicable when "Depressurize" option is selected |
| Output rate | 300 O2/s | Applicable when "Depressurize" option is not selected |
Media
Tips
- You can pressurize a room without it being connected to the conveyors to the oxygen generator. Simply connect a vent directly from the pressurized room to another vent in the non-pressurized one. Set the vent in the pressurized room to depressurize. The oxygen will be pulled from that room to the empty one.
Known Issues
Related Items
Programming
Update History
| Update 01.074 |
|
