通風口
注意 |
---|
过期的信息 |
Contents
概述
此塊是在V1.074推出
這是遊戲中的氧氣系統的一部分。通氣孔必須連接到氧氣源以釋放氧氣到房間。有效的氧氣來源,可以是一個氧氣產生器或氧氣罐。
用途
The air vent has to be connected to those blocks either directly by its conveyor port on the back, or by connecting it to an existing Conveyor Network where at least one oxygen source block is present. (see above)
通風口的狀態
關於通氣口上的4個指示器,用於顯示排氣閥的當前狀態,並提供關於通風口被安裝在房間的一些資訊。
Game version: 1.105
互動
通風口可以觸發其他方塊。 在控制板面, 通風口選項中, 選擇 "Setup Actions" . This will display the block selector interface. At the bottom of the screen are two unmarked empty boxes. The left box is triggered when the Air Vent detects 100% oxygen, the right box is triggered when the Air Vent detects 0% oxygen. This can happen if there's a breach (open an outside door or a block gets removed/destroyed), or if the Air Vent is set to "Depressurize".
To see an example of this, see the following "test" station blueprint.
Oxygen ventilation capacities
Game version: 1.078.009
Input rate | 300 O2/s | Applicable when "Depressurize" option is selected |
Output rate | 300 O2/s | Applicable when "Depressurize" option is not selected |
Media
Tips
- You can pressurize a room without it being connected to the conveyors to the oxygen generator. Simply connect a vent directly from the pressurized room to another vent in the non-pressurized one. Set the vent in the pressurized room to depressurize. The oxygen will be pulled from that room to the empty one.
- Despite Small block Air Vents being available for small ships, small blocks cannot be used to make air tight rooms. Therefore its not possible to pressurize the cabin or internal parts of a small ship even if completely enclosed with normally airtight blocks such as small armor.
Known Issues
Related Items
Programming
Update History
Update 01.105 |
|
Update 01.092 |
|
Update 01.074 |
|