Difference between revisions of "Advanced Rotor/zh"

Revision as of 07:47, 2 December 2020

大型舰船 / 空间站
高级转子

---

组件需求

---

 有功能 

---

钢板5

计算机2

---

 破解 

---

马达4

大型钢管4

结构零件10

钢板10

---

尺寸（宽,高,长）1,2,1

重量576.4 kg

576,400 g
576,400,000 mg
0.576 t

完整度2,202

建造耗时20 s

最大输入功率2,000 W

0.002 MW
2 kW

耗电分组Utility

气密情况通气

性能成本（PCU）100

部件 高级转子部件

明细编辑于: 2020-05-20

小型舰船
高级转子

---

组件需求

---

 有功能 

---

钢板2

计算机1

---

 破解 

---

马达1

小钢管1

结构零件5

钢板3

---

尺寸（宽,高,长）3,2,3

重量168.2 kg

168,200 g
168,200,000 mg
0.168 t

完整度706

建造耗时10 s

最大输入功率200 W

2.0e-4 MW
0.2 kW

耗电分组Utility

气密情况部分或可控

性能成本（PCU）100

部件 高级转子部件

明细编辑于: 2020-05-20

   == Overview ==
   The Advanced Rotor is a block that lets the player place blocks on top and rotate them. It is in all respects similar to the Rotor, except that it allows objects to pass through it via the Conveyor System. Its functions are identical of that of the original rotor, and is actually made up of two parts; the base advanced rotor block and the Advanced Rotor Part. The other difference is that the advanced rotor is larger. Together they form a grid-to-grid connection, allowing: control/commands, power and if connected properly Conveyor Networks to be shared and connected together very much like a rotor.
   
   == Usage ==
   Simply place the advanced rotor block, and then place any blocks on top. To rotate the advanced rotor, go into the control panel and adjust the velocity to either a positive or negative value. The higher the value, the faster the rotor will spin. The amount of mass the rotor has on top will affect its speed and torque. The more mass, the slower it will go (even at high velocity). It is possible for the advanced rotor to break apart if the mass is too great, or the base it is placed on is unstable.
   
   The main feature advanced rotor is that it can connect to Conveyor blocks and transfer items through it (even while rotating). This requires no setup by the player, just place any conveyor or inventory block on-top of it, and it will be ready to use.
   === Control Panel ===

   Positive velocity values turn clockwise when looking 'down' at the rotor, while negative velocity values turn counter-clockwise. Note that the lower limit is ignored while the rotor is turning clockwise (using a positive velocity value). Similarly, the upper limit is ignored while the rotor is turning counter-clockwise (using a negative velocity value). Upper and lower limits can both range from -360° to +360°, but the value for the upper limit must always be higher than the value for the lower limit. As a special case, an upper limit of 361° can be set which allows for unlimited clockwise rotation; similarly, a lower limit of -361° can be set for unlimited counter-clockwise rotation. The rotor interface simplifies these details away, but the exact numbers can be useful for rotor programming.
   
   == Media ==

   == Tips ==

   *The advanced rotor consists of two blocks. The top and base are both two different blocks.
   *The block must be powered to transfer items through it
   *If you delete / destroy the top part of the rotor, you must build a new advanced rotor because there is no top block in the block list.

   == Programming ==
   (IMyMotorBase) = Stator

   Actions: 19
    Toggle block On/Off
    Toggle block On
    Toggle block Off
    Reverse
    Detach
    Attach
    Increase Torque
    Decrease Torque
    Increase Braking tor.
    Decrease Braking tor.
    Increase Velocity
    Decrease Velocity
    Reset Velocity
    Increase Lower limit
    Decrease Lower limit
    Increase Upper limit
    Decrease Upper limit
    Increase Rotor displacement
    Decrease Rotor displacement
   
   Properties: 6
    Torque Single
    BrakingTorque Single
    Velocity Single
    LowerLimit Single
    UpperLimit Single
    Displacement Single
   
   (IMyMotorAdvancedStator) = Rotor

   Actions: 0

   Properties: 0
   
   == Update History ==

   *Advanced rotor introduced