创造模式

🚧🚧🚧 Under Construction 🚧🚧🚧
Attention - This page is currently being actively worked on, and may contain incomplete information

综述

创造模式是游戏中用来专注自由建造的模式，工程师的世界将会有如下基本变化：

人员：

• 不再消耗氧气
• 太空服蓄电量永远满载
• 不再损耗氢气
• 背包的容量无限

工具装备（含方块类）：

• 所有切割机在拆卸方块后不再获得零件，这些零件直接消失
• 所有武器开火均不消耗弹药

方块：

• 放置方块距离最大可调至 100米
• 放置的电池方块，永远都是满电
• 放置的气罐方块，初始半额储量，但会应需求消耗

除了以上变化外，创造模式游戏中还默认 创造模式工具 和 无敌 功能有效（可在“管理员菜单”>管理员工具 中找到；且无论是否显示为设定，在创造模式游戏中这两功能必定有效。）

无敌

人员：

• 生命值不减，免疫全部伤害，但仍然可自杀

创造模式工具

人员：

• 人员无氧亦可呼吸
• 喷气包无氢亦可正常推进
• 方块蓝图全部可用，不受进度设定影响

工具装备（含方块类）：

• 所有焊接器在方块的维修和补完时，无需提供任何零件。

方块：

• 方块直接放置成品无需零件补完

---

• 允许批量放置方块
• 允许直接操作物体
• 允许使用生成菜单：该菜单可以生成各种
• 允许使用对称建造方式放置方块
• 允许跨越网格权限记录蓝图
• 允许直接蓝图放置为成品

批量放置方块

工程师在干活

在手持方块蓝图（比如立方体装甲块）并将虚体依附到已存在网格时，按下 Ctrl + 🖱️鼠左键 不放，并控制视角或角色往某个方向A 移动，可以拉出一个单列的立方柱；在此间，你按下 ⇧ Shift 键不放，通过转动视角或将角色平移往方向A 的垂直方向B，可以拉出以AB方向为边长的 方块平面

在“游戏选项设置”> 建筑模式 单选卡中可调设定，从而改变操作方式适应某些工作量巨大的情况。

直接操作物体

可对 10km 里内的 目标 瞄准 进行操作：

删除：按Ctrl+Del 对网格和漂浮物删除；对小行星删除，行星卫星无效。

剪切：按Ctrl+X 对网格和漂浮物剪切；对小行星删除，对行星卫星无效。

复制：按Ctrl+C 对网格和漂浮物复制；对天体均无效

</a>粘贴：按Ctrl+V 准备将剪贴板内容（网格或漂浮物）放置（有虚体），并在调节放置距离后，按鼠标左键放置

蓝图强化

记录蓝图时Ctrl+B，可以记录无权记录的网格为蓝图；

打开蓝图窗口（F10），可以将选中的蓝图复制到剪贴板（鼠标双击 或 按复制到剪贴板），会进入粘贴准备放置模式（见粘贴）蓝图可以直接放置为实体，无需焊接

生成物体

通过“生成菜单”可生成 漂浮物、天体、体素空间等

调节放置物体的距离

准备放置时（有虚体）可以通过 Ctrl+滚轮，调节放置距离：

• 剪贴板内容的放置（漂浮物、网格（含蓝图）），最大20公里
• 生成菜单生成放置（漂浮物、天体），最大距离未知上限（我尝试了7位的光秒）

对称建造功能

对称放置

也称为镜像功能，该功能可以让工程师们基于设定的对称基准面同时对2到8个位置的方块进行放置或消除的操作。

先设置基准面，然后才能快速调用对称建造功能。具体设置过程如下：

• 首先手持方块蓝图，虚体需要依附并对准准备作为对称基准的网格方块；
• 按M会次第轮到每个对称面的设定，并且按鼠标左键确认用面，鼠标右键取消用面（按7次M完整设定一次）
  1. 是对称 X 面（标准，x=0 网格，yoz面）
  2. 是对称 X 面（偏移，x=1 网格，yoz面）

     这两个面均设置对称 X 面，确认后者会取消前者，每轴对称面最多只有1个生效。

  3. 是对称 Y 面（标准，y=0 网格，zox面）
  4. 是对称 Y 面（偏移，y=1 网格，zox面）
  5. 是对称 Z 面（标准，z=0 网格，xoy面）
  6. 是对称 Z 面（偏移，z=1 网格，xoy面）
• 再按M会回到放置蓝图的模式下，这个时候只要蓝图方块依附做好对称面的网格时，就会显现出蓝图方块基于各对称面对称虚体，如果对称虚体也有依附到本网格上（即便非本网格是相对静态稳定，虚体也不会被放置到非本网格上），则放置方块时，对称虚体也会被放置。删除方块也是一样的道理
• 按N就会开关对称功能；
• 每个独立网格的对称面相互独立；
• 只有方块虚体依附到有对称面的网格上时，才会显示网格的对称面
• 当三个对称面交点的基准方块被删除后，对称面并不会消失；只有对称面所归属的网格完全消失了，对称面才会消失。
• 对称面在网格被撕开时，会迁移到优势网格上，劣势网格会失去对称面。（如果切割为八块等势，则按一定规则选择其中一份，比方右手定则之类的方式，暂不深究）

Spawning Objects

生成菜单 以下是生成物菜单窗口 In Creative Mode/zh, player(s) can instantly spawn in nearly any object in the game, or from the workshop. This includes, but not limited to - Components, Tools, Materials, Ores, ships, stations, asteroids, and planets.

Adjusting Placement

Players can decrease/increase the range the object they're spawning from them with the Control - (default) CTRL+SCROLLWHEEL UP/DOWN.

Blueprints

Blueprints can be instantly spawned in Creative Mode/zh via (default) - F10 without the need for a Projector, or Components. Any items that were inside the blueprint when it was saved will also be included when spawned. All blueprints when spawned in Creative Mode/zh are set to Ownership - Nobody (neutral).

Additionally, players can save their blueprints faster in Creative Mode/zh by copying the ship/station into the clip board - (default) CTRL+C, and then going into the blueprint menu (default) - F10, and selecting "Create from clipboard", or "Replace with clipboard" which will replace the selected blueprint.

Asteroids & Planets

Asteroids and Planets/Moons can be spawned in Creative Mode/zh by going into the menu - (default) SHIFT+F10. Either pre-built models (ex: asteroids) can be inserted, or randomly generated objects using the procedural system.

Predefined

Predefined asteroids are pre-built models that players can spawn in the game. They range from mountains on planets, to asteroids in space. They have no random generation.

Procedural

Procedural objects allow a player to randomly generate an asteroid with a different variation, and ore content each time. The variation can also depend on the size, and seed type the player chooses.

Size	This slider determines the size of the object you want to spawn in. Only a minimum of 5m to 500m can be spawned with the procedural system.
Seed	A seed is an assigned a random unique value. The seed acts as a bar-code and allows SE players to share unique asteroids they discover from other people or find on their own. However, it should be noted that any changes made to the asteroid by the player will not show in a newly created seed when spawned again.
Generate Seed	This action randomly produces a random seed (variation).

Planets

Players are able to spawn their own custom generated Planets & Moons using the procedural generator. It allows a player to randomly generate a planet for example with a different variation to its surface each time it is spawned in with different seeds and size settings.

Size	This slider determines the size of the object you want to spawn in. Only a minimum of 19km to 120km can be spawned with the planet spawn system.
Seed	A seed is an assigned a random unique value. The seed acts as a bar-code and allows SE players to share unique planets they discover from other people or find on their own. However, it should be noted that any changes made to the planet's surface by the player will not show in a newly created seed when spawned again.
Generate Seed	This action randomly produces a random seed (variation).
Surface Type	Preset surface types can be selected and used when spawning in a new planet. ex)Earth-like will produce the same textures and planets as the preset Earth planet.

Items

Items such as Components, Materials, Ores, and Tools can be spawned in via (default) - SHIFT+F10. Their quantity can be adjusted, and then placed. It should be noted that ore quantity of Ore will increase in overall size if the value is increased.

Update History

Update 01.007

Copy, paste, delete added to the game