Difference between revisions of "Spherical Gravity Generator/zh"
From Space Engineers Wiki
(Created page with "{{SimpleItembox|Mod:Vanilla/CubeBlock/GravityGeneratorSphere|Size|Mass|Integrity|BuildTimeSeconds|MaxRadius|MaxGravityAcceleration|ResourceSinkGroup|IsAirTight|PCU}} ==球状...") |
|||
Line 1: | Line 1: | ||
{{SimpleItembox|Mod:Vanilla/CubeBlock/GravityGeneratorSphere|Size|Mass|Integrity|BuildTimeSeconds|MaxRadius|MaxGravityAcceleration|ResourceSinkGroup|IsAirTight|PCU}} | {{SimpleItembox|Mod:Vanilla/CubeBlock/GravityGeneratorSphere|Size|Mass|Integrity|BuildTimeSeconds|MaxRadius|MaxGravityAcceleration|ResourceSinkGroup|IsAirTight|PCU}} | ||
+ | [[File:SphericalGravityGenerator01.jpg|thumb|343px|view of the spherical gravity generator]] | ||
+ | [[File:SphericalGravityGenerator07.jpg|thumb|343px|In this image, it shows a space engineer standing on an angle on-top of a spherical generator]] | ||
+ | [[File:SphericalGravityGenerator08.jpg|thumb|343px|Placed in the center of this massive asteroid is a spherical gravity generator. This allows engineers, as well as ground vehicles with [[Artificial Mass]] to travel along its surface.]] | ||
==球状重力发生器== | ==球状重力发生器== | ||
− | + | 球状重力发生器将以自体为中心形成一个球形域人造引力场; | |
− | |||
− | |||
− | + | == 参数调节- == | |
+ | 球状重力发生器参数有场域体积(通过场半径表示)和场加速度: | ||
+ | *该发生器方块产生的力场,基于占位方块的中心点为力场球心:(注意半个大网格方块的长度是1.25米) | ||
+ | :场半径(Radius)是影响位置到球心的距离(米); | ||
+ | :场半径最近10米,最远400米。 | ||
+ | *场加速度(Acceleration)设置为正时,力场作用方向由顶向底;若负则反向。 | ||
+ | :力场加速度上限绝对值是 9.8;场内任何位置的受力均相等。 | ||
− | |||
− | |||
− | + | === 用电需求 === | |
− | + | 力场的电力消耗与其 影响体积、加速度强度 及 运作时间 有关;你可以针对性的在这些方面调节以找到最适合的方式。否则电力消耗就会非常可观。 | |
+ | :'''用电需求'''(MW) = 0.0003 x 场加速度 x 球体场域体积(= PI*半径^3)^ 0.35 | ||
+ | {{stuba|参考修订需要:Power requirements scale linearly based on both radius and acceleration. 1.6 MW are required to run at full strength and range (400 m and positive or negative 9.81 m/s<sup>2</sup> acceleration). Reducing range to 200m reduces power consumption to 0.8 MW. Reducing acceleration to positive or negative 4.905 m/s<sup>2</sup> has the same effect on power consumption.}} | ||
− | |||
− | |||
− | === | + | ==相关== |
− | + | === 方块 === | |
− | + | * [[Gravity Generator]] | |
− | == | ||
− | |||
− | |||
− | [[ | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | == | + | === 参阅 === |
− | + | [天体引力]圈内[人造引力]的影响会大幅削弱,甚至达到某个程度时会失去影响效果 —— 可参阅[引力] | |
− | + | <references /> | |
− | |||
+ | === 编程=== | ||
* [[Programming_Guide/Action_List#Spherical_Gravity_Generator|Action List - Spherical Gravity Generator]] | * [[Programming_Guide/Action_List#Spherical_Gravity_Generator|Action List - Spherical Gravity Generator]] | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
+ | === 记录 === | ||
{| class="wikitable" | {| class="wikitable" | ||
− | + | || [[Update 01.044]] ||| | |
− | + | *Spherical Gravity Generator Introduced | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|} | |} | ||
− | |||
{{DISPLAYTITLE:球状重力发生器}} | {{DISPLAYTITLE:球状重力发生器}} |
Revision as of 09:08, 12 December 2020
尺寸(宽,高,长)1,1,1
重量8,532 kg
8,532,000 g
8,532,000,000 mg
8.532 t
8,532,000,000 mg
8.532 t
完整度20,320
建造耗时50 s
最大场域半径400 m
最大引力加速度绝对值9.81 m/s²
耗电分组Utility
气密情况通气
性能成本(PCU)200
明细编辑于: 2020-04-13
球状重力发生器
球状重力发生器将以自体为中心形成一个球形域人造引力场;
参数调节-
球状重力发生器参数有场域体积(通过场半径表示)和场加速度:
- 该发生器方块产生的力场,基于占位方块的中心点为力场球心:(注意半个大网格方块的长度是1.25米)
- 场半径(Radius)是影响位置到球心的距离(米);
- 场半径最近10米,最远400米。
- 场加速度(Acceleration)设置为正时,力场作用方向由顶向底;若负则反向。
- 力场加速度上限绝对值是 9.8;场内任何位置的受力均相等。
用电需求
力场的电力消耗与其 影响体积、加速度强度 及 运作时间 有关;你可以针对性的在这些方面调节以找到最适合的方式。否则电力消耗就会非常可观。
- 用电需求(MW) = 0.0003 x 场加速度 x 球体场域体积(= PI*半径^3)^ 0.35
Q 参考修订需要:Power requirements scale linearly based on both radius and acceleration. 1.6 MW are required to run at full strength and range (400 m and positive or negative 9.81 m/s2 acceleration). Reducing range to 200m reduces power consumption to 0.8 MW. Reducing acceleration to positive or negative 4.905 m/s2 has the same effect on power consumption.
相关
方块
参阅
[天体引力]圈内[人造引力]的影响会大幅削弱,甚至达到某个程度时会失去影响效果 —— 可参阅[引力]
编程
记录
Update 01.044 |
|