Power Efficiency Upgrade Module

From Space Engineers Wiki
Revision as of 12:18, 4 December 2015 by Sapphire (talk | contribs) (Media)
Jump to: navigation, search


Power Efficiency Upgrade Module Icon.png
Large Ship Icon.png
Large Ship / Station
Power Efficiency Upgrade Module
 
Components
Required

 

 
 
2
 
 
Mass (kg):
0
 
Integrity:
0
 
Build time (seconds):
8
 
Disassemble Ratio:
2.5
 
Dimensions (W x H x D):
1 x 2 x 1

Overview

The Power Efficiency Upgrade Module is a 2x1x1 block that can be placed on an Assembler or a Refinery to decrease the power consumption.

Usage

The Power Efficiency Upgrade Module decrease the amount of power used by the Refinery/Assembler a maximum of four can be placed on both the Refinery. While the Assembler can only fit 2 or 3 modules. Using the maximum amount of modules that a refinery could hold would cause the Refinery/Assembler to have 500% Power Efficiency - bring down its power consumption while running to only 20% it would have been. The Power Efficiency Upgrade Module must be fully put on a attachment point to function correctly. It does not affect its minimum or idle power requirement, only its maximum.

Formula:

Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
No. of Modules Total Power Efficiency Max Power Consumption [kW]
0 100% 560.00
1 150% 374.49
2 224% 250.44
3 334% 167.48
4 500% 112.00

Media

Power Efficiency Upgrade Module PEUM01.jpg

Tips

Known Issues

Related Items

Programming

Update History