Difference between revisions of "Power Efficiency Upgrade Module"

From Space Engineers Wiki
Jump to: navigation, search
(Media)
 
(14 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{itembox
+
{{DISPLAYTITLE:Power Efficiency Module}}
| item = Power Efficiency Upgrade Module
+
{{SimpleItembox|Mod:Vanilla/CubeBlock/LargeEnergyModule
| description = Reduces Active power consumption of object attached to.
+
|Size|Mass|Integrity|BuildTimeSeconds|UpgradeModuleModifier#%|UpgradeModuleModifierType|IsAirTight|PCU}}{{CategorizeComponents|Mod:Vanilla/CubeBlock/LargeEnergyModule}}
| tool = no
 
| largeship = yes
 
| smallship = no
 
| component = no
 
| rawmaterial = no
 
| material = no
 
 
 
| lbuildtime = 8
 
| ldisassembleratio = 2.5
 
| lcomponentstructure = 2
 
| lcomponent1 = Steel Plate
 
| lcomponent1amt = 20
 
| lcomponent2 = Motor
 
| lcomponent2amt = 2
 
| lcomponent3 = Large Steel Tube
 
| lcomponent3amt = 10
 
| lcomponent4 = Small Steel Tube
 
| lcomponent4amt = 20
 
| lcomponent5 = Construction Component
 
| lcomponent5amt = 40
 
| lcomponent6 = Steel Plate
 
| lcomponent6amt = 80
 
| lwidth = 1
 
| lheight = 2
 
| ldepth = 1
 
 
 
| version = 01.108
 
}}
 
  
 
==Overview==
 
==Overview==
The Power Efficiency Upgrade Module is a 2x1x1 block that can be placed on an [[Assembler]] or a [[Refinery]] to decrease the power consumption.
+
The Power Efficiency Module is a 2×1×1 block that can be placed on an [[Assembler]] or a [[Refinery]] to decrease [[Electricity|power]] consumption.
  
 
==Usage==
 
==Usage==
The Power Efficiency Upgrade Module decrease the amount of power used by the [[Refinery]]/[[Assembler]] a maximum of four can be placed on both the [[Refinery]]. While the [[Assembler]] can only fit 2 or 3 modules. Using the maximum amount of modules that a refinery could hold would cause the [[Refinery]]/[[Assembler]] to have 500% Power Efficiency - bring down its power consumption while running to only 20% it would have been. The Power Efficiency Upgrade Module must be fully put on a attachment point to function correctly. It does not affect its minimum or idle power requirement, only its maximum.
+
This module, just like the [[Effectiveness Upgrade Module|Yield Module]] and the [[Productivity Upgrade Module|Speed Module]], has 2 attachment points that look like small squares on the flat side of the block. These attachment points can be placed against the attachment points found on the backs of [[Refinery|refineries]] or all sides of [[Assembler|assemblers]] to increase the Power Efficiency of the refinery or assembler by +50% per attachment point. As both kinds of production blocks have 8 total attachment points, the maximum Power Efficiency for those blocks is 500% (100% for a refinery or assembler without any modules), which brings down power consumption to only 20% its original value.
 +
 
 +
These modules only affect the active power consumption (while the production block is working); it does not affect the minimum power consumption of the machine when idle.
  
 
Formula:
 
Formula:
 
  Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
 
  Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
  
{|class="wikitable"
+
{|class="wikitable" style="text-align: center;"
 
|-
 
|-
!No. of Modules !! Total Power Efficiency || Max Power Consumption [kW]  
+
!No. of Modules || No. of active Attachment Points || Total Power Efficiency|| Remaining Power Consumption || Power Consumption Difference to 1 less Module || Max Power Consumption For an Assembler [kW]  
 
|-
 
|-
 
! 0  
 
! 0  
| 100% || 560.00
+
| 0 || 100% || 100%|| -|| 560.00
 
|-
 
|-
 
! 1  
 
! 1  
| 150% || 374.49
+
| 1 || 122% || 81.77% || -18.23% || 457.95
 +
|-
 +
! 1
 +
| 2 || 150% || 66.67% || -15.1% || 374.49
 
|-  
 
|-  
 
! 2  
 
! 2  
| 224% || 250.44
+
| 3 || 183% || 54.69% || -11.98% || 306.25
 +
|-
 +
! 2
 +
| 4 || 224% || 44.93% || -21.82% || 250.44
 
|-
 
|-
 
! 3  
 
! 3  
| 334% || 167.48
+
| 5 ||273% || 36.57% || -8.36% || 204.80
 +
|-
 +
! 3
 +
| 6 ||334% || 29.94% || -6.63% || 167.48
 +
|-
 +
! 4   
 +
| 7 ||409% || 24.46% || -5.48%|| 136.96
 
|-
 
|-
 
! 4     
 
! 4     
| 500% || 112.00
+
| 8 ||500% || 20% || -4.46% || 112.00
 
|}
 
|}
  
Line 64: Line 50:
  
 
== Tips ==
 
== Tips ==
*To maximize power efficiency it would take 8 [[Motor]]s, 40 [[Large Steel Tube]]s, 80 [[Small Steel Tube]]s, 160 [[Construction Component]]s, and 400 [[Steel Plate]]s just to get that extra 500% power efficiency.
+
*To maximize power efficiency it would take 16 [[Motor]]s, 80 [[Power Cell]]s, 80 [[Small Steel Tube]]s, 160 [[Construction Component]]s, and 400 [[Steel Plate]]s just to get that extra 500% power efficiency.
  
== Known Issues ==
+
*The fact that each attachment point is calculated separately means that you can span these across two machines or share them with a [[Refinery]] and an [[Assembler]].
  
 
== Related Items ==
 
== Related Items ==
*[[Effectiveness Upgrade Module]]
+
*[[Effectiveness Upgrade Module|Yield Module]]
*[[Productivity Upgrade Module]]
+
*[[Productivity Upgrade Module|Speed Module]]
 
+
[[Category:Functional Blocks]]
== Programming ==
 
 
 
== Update History ==
 

Latest revision as of 00:39, 9 June 2023

Power Efficiency Upgrade Module Icon.png
Large Ship / Station
Power Efficiency Module
Large Ship Icon.png

ComponentsRequired

 Functional 

Dimensions (W,H,L)1,1,2
Mass2,996 kg
2,996,000 g
2,996,000,000 mg
2.996 t
Integrity12,660
Build time
Modifier value122.284 %
Modifier operationMultiplicative
Is AirtightNo
PCU Cost1
BrowseLast edit: 2020-04-13

Overview

The Power Efficiency Module is a 2×1×1 block that can be placed on an Assembler or a Refinery to decrease power consumption.

Usage

This module, just like the Yield Module and the Speed Module, has 2 attachment points that look like small squares on the flat side of the block. These attachment points can be placed against the attachment points found on the backs of refineries or all sides of assemblers to increase the Power Efficiency of the refinery or assembler by +50% per attachment point. As both kinds of production blocks have 8 total attachment points, the maximum Power Efficiency for those blocks is 500% (100% for a refinery or assembler without any modules), which brings down power consumption to only 20% its original value.

These modules only affect the active power consumption (while the production block is working); it does not affect the minimum power consumption of the machine when idle.

Formula:

Total Power Efficiency = 1.2228445 ^ Attachment points connected to upgrade module, each module provides 2.
No. of Modules No. of active Attachment Points Total Power Efficiency Remaining Power Consumption Power Consumption Difference to 1 less Module Max Power Consumption For an Assembler [kW]
0 0 100% 100% - 560.00
1 1 122% 81.77% -18.23% 457.95
1 2 150% 66.67% -15.1% 374.49
2 3 183% 54.69% -11.98% 306.25
2 4 224% 44.93% -21.82% 250.44
3 5 273% 36.57% -8.36% 204.80
3 6 334% 29.94% -6.63% 167.48
4 7 409% 24.46% -5.48% 136.96
4 8 500% 20% -4.46% 112.00

Media

Power Efficiency Upgrade Module PEUM01.jpg

Tips

  • The fact that each attachment point is calculated separately means that you can span these across two machines or share them with a Refinery and an Assembler.

Related Items