The Hydrogen Engine is a block used to generate power by consuming Hydrogen.At its peak capacity of 5 MW
|Tank||Capacity|| Large Engine
5,000 kW(500 L/s)
| Small Engine|
500 kW(50 L/s)
|氢气罐|| 15,000,000 L
|8 hours, 20 minutes and 0 seconds||3 days, 11 hours, 20 minutes and 0 seconds|
|小型氢气罐|| 1,000,000 L
|33 minutes and 20 seconds||5 hours, 33 minutes and 20 seconds|
|氢气引擎|| 100,000 L
|3 minutes and 20 seconds||-|
|氢气罐|| 500,000 L
|16 minutes and 40 seconds||2 hours, 46 minutes and 40 seconds|
|小型氢气罐|| 15,000 L
|30 seconds||5 minutes and 0 seconds|
|氢气引擎|| 5,000 L
|-||1 minute and 40 seconds|
Connect to a conveyor system that has Hydrogen Tanks (with Hydrogen gas) or O2/H2 Generators to refuel.
Because the engine uses the conveyor system to fill itself with hydrogen, a minimal level of power is required for the engine to start if it is empty. The internal tank of the engine is only refilled while the engine is actively running, and its contents cannot be siphoned by other blocks.
The engine prioritizes the recharging of batteries over filling other power demands, incurring the 20% energy loss as the batteries immediately use that energy to run any other powered blocks.
Only the large-grid version has any indicator lights: Recessed into the electrical box next to its control panel, above the cylinder heads in the center, and at the corners of the front fan. Green is functional, yellow when out of hydrogen, and red when turned off.
The large Hydrogen Engine consumes 0.36 liters of hydrogen for every watt-hour it produces, while the large O2/H2 Generator can produce up to 3.6 liters of hydrogen for every watt-hour it consumes. This gives the Hydrogen Engine an efficiency of 90%. In other words, if you have a closed circuit of Hydrogen Engines and O2/H2 Generators, you will spend 1 out of every 10 liters of hydrogen on power generation.
Programming in the program block.