Difference between revisions of "Hydrogen Engine"

From Space Engineers Wiki
Jump to: navigation, search
(Liter ice per second at max capacity. Usage and indicator lights.)
m (link to Conveyor_Mechanics)
Line 15: Line 15:
  
 
== Usage ==
 
== Usage ==
Connect to a conveyor system that has [[Hydrogen Tank]]s (with [[Hydrogen]] gas) or [[O2/H2 Generator]]s to refuel.
+
Connect to a [[Conveyor Mechanics|conveyor system]] that has [[Hydrogen Tank]]s (with [[Hydrogen]] gas) or [[O2/H2 Generator]]s to refuel.
  
 
Because the engine uses the conveyor system to fill itself with hydrogen, a minimal level of power is required for the engine to start if it is empty.
 
Because the engine uses the conveyor system to fill itself with hydrogen, a minimal level of power is required for the engine to start if it is empty.

Revision as of 05:49, 3 November 2020





Hydrogen Engine Icon.png
Large Ship / Station
Hydrogen Engine
Large Ship Icon.png

ComponentsRequired

 Functional 

 Hack 

Dimensions (W,H,L)1,1,2
Mass3,253.8 kg
3,253,800 g
3,253,800,000 mg
3.254 t
Integrity13,654
Build time60 s
Fuel Capacity100,000 L
100 m³
Fuel Efficiency10 kJ/L
0.01 MJ/L
10,000 J/L
2.777778e-6 MWh/L
0.00278 kWh/L
2.778 Wh/L
Max Power Output5 MW
5,000 kW
5,000,000 W
Power Consumer GroupGenerators
Is AirtightNo
PCU Cost25
BrowseLast edit: 2020-11-25
Hydrogen Engine Small Icon.png
Small Ship
Hydrogen Engine
Small Ship Icon.png

ComponentsRequired

 Functional 

 Hack 

Dimensions (W,H,L)3,2,2
Mass1,005.2 kg
1,005,200 g
1,005,200,000 mg
1.005 t
Integrity4,141
Build time40 s
Fuel Capacity5,000 L
5 m³
Fuel Efficiency10 kJ/L
0.01 MJ/L
10,000 J/L
2.777778e-6 MWh/L
0.00278 kWh/L
2.778 Wh/L
Max Power Output0.5 MW
500 kW
500,000 W
Power Consumer GroupGenerators
Is AirtightNo
PCU Cost25
BrowseLast edit: 2020-11-25

Overview

The Hydrogen Engine is a block used to generate power by consuming Hydrogen.

At its peak capacity of 5 MW
5,000 kW
5,000,000 W
, the large engine consumes 500 liter hydrogen per second while the small-grid version consumes 50 L/s at 0.5 MW
500 kW
500,000 W
.

Usage

Connect to a conveyor system that has Hydrogen Tanks (with Hydrogen gas) or O2/H2 Generators to refuel.

Because the engine uses the conveyor system to fill itself with hydrogen, a minimal level of power is required for the engine to start if it is empty. The internal tank of the engine is only refilled while the engine is actively running, and its contents cannot be siphoned by other blocks.

The engine prioritizes the recharging of batteries over filling other power demands, incurring the 20% energy loss as the batteries immediately use that energy to run any other powered blocks.

Indicator

Only the large-grid version has any indicator lights: Recessed into the electrical box next to its control panel, and above the cylinder heads in the center. Green is functional, yellow when out of hydrogen, and red when turned off.


Efficiency

The Hydrogen Engine consumes .72 liters of hydrogen for every watt-hour it produces, while the O2/H2 Generator produces 3.6 liters of hydrogen for every watt-hour it consumes. This gives the Hydrogen Engine an efficiency of 80%. In other words, if you have a closed circuit of Hydrogen Engines and O2/H2 Generators, you will spend 1 out of every 5 liters of hydrogen on power generation.

Media

Programming

Programming in the program block.

Interface name: 


See also


Update History