Timer Block

From Space Engineers Wiki
Revision as of 22:44, 18 May 2020 by Vox Serico (talk | contribs) (categories)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Timer Block Icon.png
Large Ship / Station
Timer Block
Large Ship Icon.png

ComponentsRequired

 Functional 

 Hack 

Dimensions (W,H,L)1,1,1
Mass259 kg
259,000 g
259,000,000 mg
0.259 t
Integrity995
Build time10 s
Is AirtightYes
Power Consumer GroupUtility
PCU Cost25
BrowseLast edit: 2020-04-09
Timer Block Icon.png
Small Ship
Timer Block
Small Ship Icon.png

ComponentsRequired

 Functional 

 Hack 

Dimensions (W,H,L)1,1,1
Mass30.2 kg
30,200 g
30,200,000 mg
0.0302 t
Integrity121
Build time4 s
Is AirtightYes
Power Consumer GroupUtility
PCU Cost25
BrowseLast edit: 2020-04-24

Overview

The Timer Block is a meta block used to execute actions of any block it's connected to (not physically). The actions can also be executed after a delay, hence the name. This allows automation / programming of actions.

Usage

An action is defined by the properties of a block. Often the actions are the ones you can apply in the "G"-menu when e.g. configuring the action bar of a cockpit. For instance, a Warhead can be detonated or the safety can be toggled on or off. The Timer Block can also execute it's own actions, enabling loops by ending it's sequence with a Start.

A block is connected with the Timer Block when both are on the same grid or sub-grid (other grids that connected via Connectors, Rotors or Pistons). Connection via antennas, i.e. executing actions in remote objects is currently not possible.

Terminal

Name Min. Value Max. Value Unit Description
Trigger Delay 1 3600 Second Delay to execute the actions after starting the timer
  • Trigger now - Immediately executes all programmed actions
  • Start - Starts a timer with the current delay and executes all programmed actions after the timer expires
  • Stop - Stops the timer if running thereby preventing the execution of the actions after the delay
  • Setup Actions - Set up blocks to trigger when the Timer Block is activated

Rules / Behavior

  1. The Timer Block can execute up to 90 actions
  2. Switching the Timer Block off while the timer is running doesn't stop the timer, just interrupts its operation for the duration it's off. The timer continues operation after switching the Timer Block on again (this is currently bugged, it will not continue if a map has been reloaded)
  3. Timer block delays are not entirely accurate. A timer set to 5 seconds may not fire until 5.5 seconds have elapsed. If you are triggering things which depend on an exact number of game ticks/length of game time, timer delays may not be the right tool. Further experiments needed to confirm exact behaviour.
  4. Executing actions Trigger Now and Start immediately after action Toggle block On: These actions won't be executed if programmed in another timer block which switches the timer block on (when it is in state "off")

E.g.

Timer Block 1:
Action 1: Timer Block 2 - Toggle block On
Action 2: Timer Block 2 - Start

On triggering Timer Block 1 when Timer Block 2 is off, the Start action has no effect because Timer Block 2 needs some time to power up but the Start action is executed before it's powered up.

  • Switching a Timer Block off ends a Trigger Now (endless) loop.

E.g.

Timer Block 2:
Action 1: Rotor 1 - Increase Velocity
Action 2: Timer Block 2 - Trigger Now

Triggering Timer Block 2 starts an endless loop increasing the revolution speed of Rotor 1. Switching Timer Block 2 off will end this loop. It won't be continued when switching Timer Block 2 on again.


Media

Timer Block TimerB01.jpg

Tips

  • Timer blocks can be used to setup a long list of actions with one trigger. For example, a Button Panel switch can activate a Timer block, which then triggers a group of lights, and several individual blocks.

Known Issues

  • A curious property of the timer block is that although it requires Electricity, it does not actually consume any Watts idle or otherwise. If a Grid has any power available to it, it will be able to run without consuming any of the electricity available.

See Also

Programming

Update History

Update 01.047
  • Timer Block Introduced